Multi-Pro®
A vinyl acrylic for high-volume contract work, where a large number of units have to be turned over on schedule. Good hiding for the number of coats specified.
- Flat only
- Low VOC
- 1 gal / 5 gal
Tile Warehouse is an authorised PPG stockist for Trinidad & Tobago. Interior and exterior lines are held on the floor and tinted at our counter to PPG formulas on calibrated equipment.
1883
Founded, Pittsburgh
70+
Countries served
2,000+
Colour formulas in-store
C5-M
Marine corrosion class
Trinidad is demanding on paint. Ultraviolet load runs high year-round, the rainy season brings months of wind-driven water, and anything near the coast is exposed to salt. A film formulated for a temperate climate can chalk, blister or lose adhesion here within a couple of seasons.
PPG tests its formulations against those conditions, including accelerated weathering, salt-spray, humidity cycling and adhesion testing on substrates common to Caribbean construction: block, render and previously coated concrete.
We hold the residential lines in depth and bring in the industrial systems to order, with the technical data sheets to match. If you are writing a specification, ask for them at the counter.
These are the PPG lines we hold on the floor. Anything else in the catalogue, including the industrial and marine systems, comes in on order with the data sheets to match.
Interior
A vinyl acrylic for high-volume contract work, where a large number of units have to be turned over on schedule. Good hiding for the number of coats specified.
Zero VOC and low odour, so a room can be painted while it is still occupied. The dry film resists mould and mildew staining.
Paint and primer in one at zero VOC, formulated for occupied buildings such as hotels, schools, nursing homes and hospitals.
Exterior
Pittsburgh Paints 100% acrylic latex, and the economical option on volume work. Full-bodied enough to build on a rough render without sagging, with mildew resistance on the dry film.
The premium exterior line. Urethane modified for a tougher film, paint and primer in one, and carrying a seven year Portersept® mildew-proof warranty. It also inhibits algae growth.
100% acrylic latex with good adhesion and dirt resistance through a wet season. For prepared and primed siding, doors, trim and windows.
Colours are mixed to a PPG formula on a calibrated dispenser and shaken in store. Bring in a fabric swatch, a cabinet door or a photograph and the spectrophotometer can match it.
Wash off chalk and salt, let damp substrates dry, fill and sand, and prime anything bare, chalky or glossy. A premium topcoat over an unprepared wall will fail sooner than a budget one over a prepared wall.
Flat hides an imperfect wall but cannot be scrubbed. Eggshell and satin wipe clean and show more of the surface underneath. Semi-gloss suits trim and wet rooms. Sheen is worth choosing for how the surface will be used, not only for appearance.
400 sq ft per gallon assumes a smooth, primed, previously painted surface. Bare block, stucco or heavy texture can take 20-30% more, and a strong colour change may need three coats. Our paint calculator uses the data-sheet rate, so allow extra for rough substrates.
A colour chip is small and lit by showroom light. The same colour across a wall in daylight generally reads lighter and more saturated. A sample pot and a test patch, checked at a few times of day, is worth doing before a large order.
Specifiers & contractors
Technical data sheets, safety data sheets and system specifications are available for every line we carry. Trade accounts, site quantities and scheduled delivery can be arranged from the counter at Chase Village.